Development of the method of production of the ultrafine macrohomogeneous composite powder

ABSTRACT

A method of ultrafine macro-homogeneous composite powder – B₄C–ZrO₂ production using a planetary mill was developed. From the macro-homogeneous composite high-density ceramics, B₄C–ZrB₂ was produced by the method of reactive sintering (in situ) at 2000°C under the pressure of 41–42?MPa. The effect of ZrO₂ grain size and of its distribution in the matrix on the consolidation parameters, and the microstructure of the obtained ceramics was studied.     

安家岭储煤场输煤暗道通风除尘技术应用研究

针对输煤暗道的生产工艺现状，提出了采用通风与密闭抽尘净化技术，结合转载落料点密闭干雾降尘等技术措施，实现了输煤暗道内粉尘的的综合治理，通过粉尘浓度在线监测系统进行智能化控制，实现对输煤暗道通风除尘系统的远程连续监测监控，输煤暗道转载点下风侧5 m作业人员通行的位置总粉尘浓度由380.8 mg/m3降至19.8 mg/m3，降尘效率达94.8%，呼吸性粉尘浓度从96.7 mg/m3降至8.4 mg/m3，降尘效率达91.3%，降尘效果较好，有效地解决了输煤暗道及其转载落料点的粉尘污染问题，为输煤暗道内的粉尘防治提供参考依据。     

飞灰固结体在沥青混合料中应用研究

通过对新型固结剂固化飞灰生成的固结体研磨成微粉全部或部分替代矿粉作为沥青混合料进行试验探究。试验结果表明,当微粉替代矿粉时,混合料的物理性能、水稳定性及高温稳定性得到了提高,确定了微粉替代矿粉最佳替代率。微粉在沥青混合料中重金属的存在状态采用多级提取的方法进行分析,试验结果进一步证明了微粉中重金属在沥青混合料中的长期稳定性。为焚烧垃圾飞灰固化稳定化和资源化利用提供了一定的理论指导。     

Synthesis of colloidal nanosilica from waste glass powder as a low cost precursor

Waste glass powder was used as a low cost precursor for production of colloidal nanosilica for the first time. The process includes production of wet silica gel and thermal peptization of the wet gel. Purification of the glass powder and wet gel production were initiated by acid washing. The obtained powder was reacted with sodium hydroxide to produce wet silica gel. Type of the applied acid was examined in one factor at a time route. Temperature of the alkaline step and concentrations of the applied acid and base were investigated using Taguchi design of experiments. After finding the best combination of the investigated factor levels in production of the wet gel, time of the stabilization in thermal peptization was studied. Characterizations of the wet gel and colloidal silica were performed by XRF, DLS, FESEM, TEM, FTIR and N₂ sorption evaluation. Accordingly pure and stable colloidal nanosilica (98.50%) with average particle size of 21.9?nm was produced from the glass powder successfully. Specific surface area of the dried porous optimum sample was 83.63?m²/g.     

H13钢等离子堆焊Ni60A/Cr3C2覆层的磨损及热疲劳性能

采用等离子堆焊技术在H13钢基体表面上制备了Ni60A/Cr₃C₂堆焊覆层,研究了覆层的磨损行为和热疲劳性能。在600 ℃下销盘试验的结果表明,镍基碳化铬复合覆层的耐磨性是Ni60A堆焊覆层的2.8倍和基材H13钢的11.6倍。镍基覆层可以显著降低H13钢的摩擦因数,加入碳化铬则会削弱覆层的摩擦性能。随着磨损的进行,主要磨损机理从氧化磨损演变为磨粒磨损和粘着磨损。在800 ℃到室温下的热疲劳测试结果表明,镍基碳化铬复合覆层在48个热循环后疲劳裂纹达到200 μm,早于镍基覆层的62次。这说明高温氧化促进热疲劳裂纹的产生。碳化铬增强相从镍基上剥离,导致镍基复合覆层热疲劳性能下降。     

石墨烯增强钛基复合材料制备工艺与性能研究

以多层石墨烯为增强体,通过熔炼锻造(MF)和粉末冶金(PM) 2种工艺分别制备出规格为Φ10 mm的石墨烯增强钛基复合材料棒材。石墨烯在凝固过程中以TiC枝晶形态析出,变形后呈细小颗粒,其中Ti和C原子比约为2∶1。石墨烯和球形钛粉经过机械合金化和变形加工,在基体中反应形成薄片层。MF工艺对应的棒材拉伸强度可达476 MPa,延伸率保持在28%; PM工艺对应的棒材拉伸强度可达487 MPa,延伸率保持在30%。PM工艺可形成尺寸较小的薄片状石墨烯增强体,强化作用提升,同时塑性没有显著下降。     

Fabrication of composites from different carbon content ferrous powders adopting thermomechanical processes

In this research, deep consolidation technique is utilized for processing of low and high carbon content ferrous powders to manufacture composite material. High carbon content ferrous powders were used as reinforcing material. The powder particles were allowed to mix with low carbon content ferrous powders in 50:50 weight percent for fabrication of composites. The composites were heat treated at three different temperatures (i.e., 800°C, 900°C, and 1000°C). The changes in microstructure, microhardness, the grain size, and bonding among powder particles were studied. Refinement of grains was observed and this led to improved hardness enabling the processed material to be used as a suitable composite. Abrasive wear tests were carried out using a laboratory tribometer in dry reciprocating sliding contact against Sic abrasive paper. The outcomes demonstrate that the abrasive wear resistance was notably affected by the treatment temperature and hardness of the composites.     

Hydrogen generation from the hydrolysis of aluminum promoted by Ni–Li–B catalyst

In this study, the high activity Ni–Li–B catalysts were fabricated through wet chemical reduction method. Their morphological structures, crystallinity, surface area and composition were examined by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) method and energy-dispersive X-ray spectroscopy (EDS). The aluminum-water reaction tests were explored in the range of temperatures from 35–75 °C. It was found that water could react with aluminum to generate hydrogen gas. The yield and hydrogen generation rate were significantly increased when all prepared catalysts were added into the reaction. The Ni–Li–B (X_LiCl = 0.1 g) catalyst exhibited the highest cumulative hydrogen volume of 201.3 ml with an average hydrogen production rate of 0.50 ml min⁻¹ at 55 °C. This phenomenon could be pointed to the emergence of the micro galvanic cell formed by the Ni–Li–B, Li/Ni–Li–B, Li and Al, which accelerated aluminum to rapidly react with water.     

Potential effects of ultrafiltration process and date powder on textural,sensory, bacterial viability,antioxidant properties and phenolic profile of dromedary Greek yogurt

The aim of this study was to improve textural and antioxidant capacity of dromedary yogurt using ultrafiltration process and date powder. Ultrafiltration increased total solids content of dromedary milk within the range considered optimal to develop yogurt. Texture profile of Greek yogurt fortified with date powder (GYD) improved considerably compared to control. Sample of GYD are more appealing to consumer than control. LC-ESI-MS analysis of GYD extracts allowed the identification of fifteen phenolic compounds, among which quinic acid and cirsiliol were found to be the major phenolic acid and flavonol, respectively. GYD exhibited the highest DPPH•-radical scavenging activity, Fe²⁺ chelating capacity and Fe³⁺ reducing power. The follow-up of physical and microbiological stability of GYD and control during cold storage showed that date powder significantly increased bacterial counts and decreased syneresis. Therefore, ultrafiltration and date powder could be valued as effective tool to solve the poor consistency of dromedary milk products.